KPL Scaffold Inc. KPL Scaffold
High Quality Scaffold and Accessories Supplier

Quality Assurance System

*Raw Material Verification

We require all raw materials come with mills certificates. We also require the primary components tested a third

internationally certified laboratories. Testing verification that verifies raw material grade by Chemical analysis and

Physical properties testing is the most critical component of quality control.


*Products or Equipment Tracking Number

All scaffold products or equipments should be stamped with tracking numbers that can track the month/year of

manufacturing, from which batch number and worker was made, and also can help to verify the heat number from

which product was made.

*In Process Inspection

Each production process has its own Quality control inspector, who is responsible for the quality of that department.

Each QC is instructed not to pass on quality issues to the next process. They have the authority not to allow full

production to begin until they have verified the first parts meet the standard and they have the authority to halt production

if a quality issue appears.

*Factory In House Test

We provide in-house testing to verify product quality. It allows for critical factors of quality to be tested consistently.

These tests include Flaring and Flattening testing to verify welding quality, Load Testing to verify material strength,

Salt Spray test and Galvanize thickness Gauges to verify surface quality.

*Third Party Inspection

Third party inspection is welcome to offer for the final product before shipment. This inspection team is from the

independent third international inspection team, like SGS, Asia Inspection, T.U.V., and so on. They serve as a

second tier of protection to prevent quality issue from leaving the factory.

*Supplier Auditing

We perform quality audits on our suppliers to verify that they meet need quality standards, or they remain compliant with

agreed standards.

*Material Incoming Inspection

All materials received from outside supplier is closely inspected. It can be accepted into production until the Quality

Control department has completely inspection it and approved it.


*Root Cause Analysis

Quality issue discovered, if any, it is investigated for its root cause. All quality issues are recorded for an accurate

account. Corrective action will be made to address the root cause.

*R & D Support

We have a strong R&D team to support quality control, quality issue overcome, technical and production process

improvement, technical support to our clients.


Address: 2700 Security Ave Colton, CA 92324 / Office: (909)820-1111

KPL Scaffold Inc. / Leading Construction equipment, LLC